Layout & Process Technology of Electric Arc Furnaces

By means of our well proven EAF process Simulation programs

• we can provide a layout - and concept study for a EAF / LF / (VD/VOD) / CCM line for your production requirement, by calculating turn around times for each facility inside the line, and depending on the steel Quality to be produced.

• we can assess the layout and the complete Performance of both DC - and AC Electric Arc Furnaces, thus being able to predict process times and all kind of consumption figures, by identifying different energy sources (electrical main data from transformer or rectifier - and reactor data, fossile energy from Oxygen & Combustion Gas from burners and Jets) for our calculations,

• we can consider different charges and Charge mixes (Scrap, Scrap / DRI, Scrap / HBI and scrap / Hot Metal ) for our calculations, including the permissible feeding rates for DRI and HBI and the required flux materials,

Process Technology of Ladle Furnaces

By means of our well proven LF process Simulation programs

• we can provide a layout- and concept study for your LF by suggesting the electrical power Input concept, the necessary Equipment on the LF Roof, required for the steel Quality to be produced.

• we can develope the specific Treatment Technology for the regarded process, considering the way of temperature and the Analysis requirements for the steel Quality to be produced, the type and chemistry of the alloying materials and the time requirements of the Downstream processes

• we can suggest a precise process guiding, in respect to the process requirements, to promote and support i.e. Deoxidation, desulphurization and alloying technics in respect to the steel qualities to be produced, in order to enhance steel cleanliness

• we can provide you with Special Knowledge for the production of Al - deoxidized steel grades with Ultra - low Sulphur specification (<0,0008 % S) by means of Ca - Technology

 Process Technology of the AOD Converter Process (Argon Oxygen Decarburization)

The AOD process is our speciality: 

• we can provide a layout- and process Technology for the AOD Converter process.

• we can provide the process Technology for the AOD Process designated for the Stainless Steel Production preferrably of small heat sizes, with the respective consumption figure and the Treatment times.

• we know the AOD Process designated for the low alloyed Steel production, where the AOD converter represents a cost - effective alternative to the LF - process especially for heat sizes between 5 - 15 t, where the LF is not suitable

• Benefits and Constraints of the process